7
Installation
5.0 Installation Checklist
This standard installation checklist is to be used by the installer in conjunction with, not instead of, the instructions contained
within this installation manual.
Customer:
Date Installed:
Install Address:
Location of Fireplace:
Installer:
Solid Fuel Zero Clearance Install: (Section 9.1)
YES
NO
IF NO, WHY NOT?
Was the bottom of the existing zero clearance removed?
Venting: (Section 13.0)
YES
NO
IF NO, WHY NOT?
Venting configuration complies with vent diagrams.
Venting installed, fastened, and secured in place maintaining proper
clearances.
Secured or removed existing solid fuel fireplace damper.
Terminations installed and sealed in compliance with local building
code.
Direct vent termination is highest point in vent assembly.
Wiring / Electrical: (Section 7.0)
YES
NO
IF NO, WHY NOT?
Connected to household 110/120v per local codes.
Unit is properly grounded.
Gas: (Section 11.0)
YES
NO
IF NO, WHY NOT?
Proper appliance for fuel type?
Was a conversion performed?
Leak check performed & inlet and manifold pressures verified?
Was the rating of the insert clocked?
Finishing:
YES
NO
IF NO, WHY NOT?
Only noncombustible material installed in noncombustible areas.
Clearances meet installation manual requirements.
Mantels and/or projections comply with install manual.
Was the solid fuel fireplace warning plate installed (
Figure 9.0.02
)?
Appliance Setup:
YES
NO
IF NO, WHY NOT?
Burner media / log set, door, and screen installed according to install
manual.
Manual given to home owner.
Did you check operation of lights, fans, and flame modulation?
Comments:
Summary of Contents for Inspiration 29
Page 66: ...NOTES...
Page 68: ......