ambiance Inspiration 29, Installation, Operation And Maintenance Manual, Page: 12 / 68

12
Installation
9.0 Minimum Opening Dimensions
The installer must mechanically attach the marking supplied with the gas fireplace insert to the inside of the firebox of the fireplace into
which the gas fireplace insert is installed. See Figure 9.0.02 .
Cutting of any sheet-metal parts of the fireplace, in which the gas fireplace insert is to be installed, is prohibited except as described in
Section 9.1
.
The fireplace and fireplace chimney must be clean and in good working order and constructed of noncombustible materials. The
chimney clean-outs must fit properly.
WARNING:
This fireplace has been converted for use with a gas fireplace insert only and cannot be used
for burning wood or solid fuels, unless all original parts have been replaced, and the fireplace
reapproved by the authority having jurisdiction.
AVERTISSEMENT: Ce foyer a ete converti pour utilisation avec un foyer au gaz encastrable et ne peut etre utiliser
pour bruler du bois ou autres combustibles solides a moins que toutes les pieces d'origine ete
remplacees et que le foyer ait ete approuve de nouveau par l'autorite competente.
303-0123
Figure 9.0.02:
A
B
C
D
E
F
G
Reference
Dimension
Controls Forward Controls Rear
A 20" (508 mm) 20" (508 mm)
B 11.4" (289.6 mm) 11.4" (289.6 mm)
C 18" (457.2 mm) 18" (457.2 mm)
D*
5" - 10.5"
(127 - 266.7 mm)
5" - 11.75"
(127 - 298.5 mm)
E*
22.375" - 18"
(568.3 - 457.2 mm)
22.375" - 18.625"
(568.3 - 473.08 mm)
F*
30.75" - 31.5"
(781.1 - 800.1 mm)
30.75" - 29.625"
(781.1 - 752.48 mm)
G* 108° - 132° 108° - 131°
Figure 9.0.01:
WARNING: Failure to position the parts in accordance
with these diagrams or failure to use only parts
specifically approved with this appliance may result in
property damage or personal injury.
* Dimensions must fit within stated limits. If a more narrow E is
required, other dimensions (D, F, and G) will change.