60
Maintenance
Step 4:
Remove the (4) screws securing the light base on the
inside of the fireplace.
Figure 20.14.04:
Figure 20.14.05:
Step 5:
Slide the light base out of the fireplace.
Step 5:
Route the new light wires and install the new light base using the screws removed in Step 4. Be sure to install the light base
bracket as shown in
Figure 20.14.04
.
Step 6:
Reinstall the cable covers (do not pinch wires during install). Slide the fireplace back into the fireplace opening.
Step 7:
Reconnect the venting according to the instructions in this manual.
Step 8:
Reinstall the light bulbs and check the lights by temporarily supplying power (do not resupply gas yet) and testing the lights.
Step 9:
Reinstall the burner, panel set (if applicable), burner media, door assembly, barrier screen, and fireplace surround (see relevant
sections in this manual).
Step 10:
Turn on gas supply and reconnect power supply.
Step 11:
Light the fireplace to verify proper operation.
Light base bracket
Summary of Contents for Inspiration 29
Page 66: ...NOTES...
Page 68: ......