AMAZONEN-Werke Amazone Centaya 3000 Super 1600, Operating Manual

Page: 32 / 222

General Safety Information
32
Centaya Super BAH0092-6 10.20
2.16.5 Operation of the seed drill

Observe the permissible filling quantity of the hopper.

Use the ladder and the loading board only for filling the hopper.
It is forbidden to ride on the implement during operation.

When calibrating the seed rate, pay attention to the danger points due to rotating and oscillating
implement parts.

Do not place any parts in the hopper.

Lock the track marker (construction-dependent) in transport position before road transport.
2.16.6 Cleaning, maintenance and repair

Only carry out cleaning, maintenance and repair work on the implement when:

the control terminal is switched off

the implement plug is disconnected from the tractor
e.g. ISOBUS plug

the drive is switched off.

the tractor engine is at a standstill

the ignition key has been removed.

Regularly check the nuts and bolts for a firm seat and retighten them as necessary.

Secure the raised implement or raised implement parts against unintentional lowering before
performing any cleaning, maintenance or repair work on the implement.

When replacing work tools with blades, use suitable tools and gloves.

Dispose of oils, greases and filters in the appropriate manner.

Disconnect the cable to the tractor generator and battery before performing electrical welding
work on the tractor and mounted implements.

Spare parts must at least comply with the specified technical requirements of AMAZONEN-
WERKE. This is ensured through the use of genuine AMAZONE spare parts.