AMAZONEN-Werke Amazone Centaya 3000 Super 1600, Operating Manual

Page: 107 / 222

Initial operation
Centaya Super BAH0092-6 10.20
107
6.1.1.7 Table
Actual value according to
calculation Permissible value
according to the
tractor operating
manual Double the
permissible tyre
load-bearing
capacity (2 tyres)
Minimum ballast weight
front/rear
/ kg -- --
Total weight kg

kg --
Front axle load kg

kg

kg
Rear axle load kg

kg

kg

You can find the permissible values for the total tractor weight,
axle loads and tyre load-bearing capacity in the tractor
registration papers.

The actually calculated values must be less than or equal to
(

) the permissible values!
WARNING
Risk of contusions, cutting, catching, drawing in and impact
through insufficient stability and insufficient tractor steering
and brake power.
It is forbidden to couple the implement to the tractor used as the
basis for calculation, if

one of the actual, calculated values is greater than the
approved value.

there is no front weight (if necessary) attached to the tractor for
the required minimum front ballast (G
V min
).

ballast your tractor with weights at the front or rear if the tractor
axle load is exceeded on only one axle.

Special cases:

If the weight of the front-mounted implement (G
V
) is not
sufficient to reach the required minimum ballast at the
front (G
V min
), you must use additional weights together
with the front-mounted implement!

If the weight of the rear-mounted implement (G
H
) is not
sufficient to reach the required minimum ballast at the rear
(G
H min
), you must use additional weights together with the
rear-mounted implement!