Cleaning, maintenance and repairs
80
ZG-TS BAG0203.2 06.19
10.2
Lubrication point overview
Lubricate all the lubricating nipples (keep the seals clean).
Lubricate / grease the machine at the specified
intervals (operating hours h).
The lubrication points on the machine are indi-
cated with the film.
Carefully clean the lubrication points and grease
gun before greasing, so that no dirt enters the
bearing. Completely press out the soiled grease
in the bearings and replace it with new grease.
Lubricants
For lubrication, use a lithium saponified, multipurpose grease with EP
additives:
Company
Lubricant designation
Normal use conditions Extreme use conditions
ARAL
Aralub HL 2
Aralub HLP 2
FINA
Marson L2
Marson EPL-2
ESSO
Beacon 2
Beacon EP 2
SHELL
Retinax A
Tetinax AM
Lubrication point
Intervall
Number
(1) Weighing pin
1000 h
4
(2)
Floor belt flange
bearing
100 h
2
