Cleaning, maintenance and repairs
216
UX01 Super CP Plus BAG0229.2 11.21
14.11.5 Oil filter
•
Oil filter for Profi-folding
•
Oil filter for hydraulic pump drive
Hydraulic oil filter (1) with contamination indicator
(2).
•
Green Filter is working
•
Red Replace filter
Checking the oil filter for contamination
The hydraulic oil must have reached operating
temperature.
1. Press in the contamination indicator.
2. Continue working with the implement.
3. Observe the contamination indicator.
Replacing the oil filter
To dismantle the filter, unscrew the filter lid and
remove the filter.
CAUTION
Depressurise the hydraulic system
beforehand.
Otherwise, there is danger of injuries
from escaping hydraulic oil at high
pressure.
After replacing the oil filter, press the
contamination indicator back down.
→
Green ring is visible again.
14.11.6 Adjusting the hydraulic throttle valve
The operating speeds for the individual hydraulic functions are
set at the factory using the respective hydraulic throttle valves
on the valve block
(fold/unfold sprayer boom, lock/unlock the
vibration compensation, etc.). However, depending on the type of
tractor, it may be necessary to correct these speed settings.
The operating speed for a hydraulic function associated with a
particular throttle pair can be adjusted by screwing the hexagon
socket head screw on the corresponding throttle in or out.
•
Reduce operating speed = screw in hexagon socket head screw.
•
Increase operating speed = screw out hexagon socket head
screw.
Always adjust the two throttles in a throttle pair equally when
correcting the operating speed of a hydraulic function.
