4. Push in a different or new blade with the open
side on the pointed area and swivel the blade on
the mount.
5. Close the rotor protective cover.
6.16
Installing the mulch flap
The machine is equipped with a mulch flap. The
mulch flap makes it possible to mow and chop without
collecting the mowed material.
1. Loosen the locking screw
1
.
2. Take off the mulch flap
2
by the handles
3
.
3. Open the rotor protective cover
4
.
CMS-I-00002376
4. Insert the mulch flap
1
in the cutting deck.
5. Hook the lugs
2
on both sides onto the bolts
3
.
6. Swivel the mulch flap to the front until the mulch
flap is resting at the rear.
The mulch flap is installed and prevents transport
of mowed material to the auger. The mowed
material is chopped and distributed on the
ground.
7. Close the rotor protective cover.
CMS-I-00002377
6.17
Removing the mulch flap
1. Shutdown the machine.
2. Open the rotor protective cover.
CMS-T-00002639-B.1
CMS-T-00002868-B.1
6 | Preparing the machine
Installing the mulch flap
MG6399-EN-II | D.1 | 11.03.2020
84
Summary of Contents for Profihopper 1500 SmartLine
Page 153: ......
