Amazone Profihopper 1500 SmartLine Operating Instructions Manual Download

Page: 18 / 154

Warning symbols

Keep warning symbols legible

Warning symbols on the machine warn you of
risks in danger areas and are an important
element of the machine's safety equipment.
Missing warning symbols increase the risk of
serious and lethal personal injury.

Clean dirty warning symbols.

Immediately replace any damaged and
illegible warning symbols.

Put the intended warning symbols on spare
parts.

2.2.2 Knowing and preventing dangers

2.2.2.1 Safety hazards on the machine

Danger due to machine parts still running

When the drives are switched off, machine parts
can continue running and cause serious personal
injury or death.

Before approaching the machine, wait until
any machine parts that are still running have
come to a stop.

Only touch machine parts that are standing
still.

CMS-T-00002652-A.1

CMS-T-00002653-B.1

CMS-T-00002654-A.1

2 | Safety and responsibility

Basic safety instructions

MG6399-EN-II | D.1 | 11.03.2020

Summary of Contents for Profihopper 1500 SmartLine



























































































































































Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands

Amazone Profihopper 1500 SmartLine, Operating Instructions Manual

Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands