Amazone Profihopper 1500 SmartLine, Operating Instructions Manual

Page: 130 / 154

8.4
Eliminating faults
Error code Error Cause Solution
Defective lighting for road
travel Lamp or lighting supply line is
damaged. see page 127
Defective fuse see page 127
Fault warning lamp is lit There is a fault on the
machine see page 128
Warning lamp for engine fault
is lit
Fault on the diesel engine Stop working with the
machine immediately.
Have engine faults
repaired by a qualified
specialist workshop.
1, 7 Warning lamp for battery
voltage is lit
Battery voltage is too low. Check the voltage of the
battery according to the
Maintenance section.
Replace defective battery.
2, 8 Warning lamp for battery
overvoltage is lit
Battery voltage is too high. Check the voltage of the
battery according to the
Maintenance section.
Check the alternator and
charge controller.
CAN DM1 Engine fault error message
appears
There is a fault on the diesel
engine Stop working with the
machine immediately.
Have engine faults
repaired by a qualified
specialist workshop.
101, 102,
131, 132,
161, 162,
191, 192,
341, 371, 401
Right pump control error
appears
Fault in the electronics Stop working with the
machine immediately.
Have the fault eliminated
by a qualified specialist
workshop.
103, 104,
133, 134,
163, 164,
193, 194
Left pump control error
appears
Fault in the electronics Stop working with the
machine immediately.
Have the fault eliminated
by a qualified specialist
workshop.
4041, 4051,
4061
Pedal sensor error
appears
Fault on the pedal sensor Stop working with the
machine immediately.
Have the fault eliminated
by a qualified specialist
workshop.
CMS-T-00002723-B.1
8 | Repairing the machine
Eliminating faults
MG6399-EN-II | D.1 | 11.03.2020 124