Amazone Profihopper 1500 SmartLine Operating Instructions Manual Download

Page: 71 / 154

5.7

Opening and closing the radiator cover

5.7.1 Opening the radiator cover

Through the radiator cover, the following components
can be accessed:

Engine radiator

Oil cooler

Air filter

Engine oil dipstick

Hydraulic oil tank

AMAZONE cooling system fan

1. Insert the special key

in the lock

2. Turn the special key to the left.

The radiator cover is unlocked.

3. Open the radiator cover

by hand with help of

the gas spring.

The gas spring holds the radiator cover in the
open position.

CMS-I-00002348

5.7.2 Closing the radiator cover

1. Close the radiator cover by hand.

2. Press the radiator cover into the locking

mechanism.

When the locking mechanism engages audibly,
the radiator cover is locked.

3. Check that the cover is properly locked.

CMS-T-00002861-B.1

CMS-T-00002623-B.1

CMS-T-00002862-A.1

5 | Practical routines

Opening and closing the radiator cover

MG6399-EN-II | D.1 | 11.03.2020

Summary of Contents for Profihopper 1500 SmartLine



























































































































































Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands

Amazone Profihopper 1500 SmartLine, Operating Instructions Manual

Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands