Amazone Profihopper 1500 SmartLine Operating Instructions Manual Download

Page: 21 / 154

2.2.3 Safe operation and handling of the machine

2.2.3.1 Driving safety

Remove dirt and loose objects

Loose objects that do not belong to the machine
can fall off the machine or be thrown and cause
personal injury.

Before you move the machine,

remove dirt, plant residues and loose objects
from the machine.

Unsupervised parking

Parked machines that are insufficiently secured
and unsupervised represent danger for people
and playing children.

Before you leave the machine,

shutdown the machine.

Secure the machine.

Parking the machine safely

The parked machine can tip over. People can be
crushed and killed.

Only park the machine on stable and even
ground.

Before you adjust, maintain or clean the
machine,

secure the machine.

Preparing the machine for road travel

If the machine is not properly prepared for road
travel, it can result in serious traffic accidents.

Before driving on roads, always prepare the
machine for road travel.

CMS-T-00002656-A.1

CMS-T-00002829-A.1

2 | Safety and responsibility

Basic safety instructions

MG6399-EN-II | D.1 | 11.03.2020

Summary of Contents for Profihopper 1500 SmartLine



























































































































































Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands

Amazone Profihopper 1500 SmartLine, Operating Instructions Manual

Search results

Summary of Contents for Profihopper 1500 SmartLine

Reviews:

Related manuals for Profihopper 1500 SmartLine

Brands by name

Popular brands