Cleaning, maintenance and repairs
•
Check tyre pressures regularly when the tyres are cold, i.e. be-
fore starting a run.
•
The difference in pressure between the tyres on one axle must
be no greater than 0.1 bar.
•
Tyre pressure can be raised by up to 1 bar after a fast run or in
warm weather. Tyre pressure should on no account be reduced
as it is then too low when the tyres cool down.
12.12.2 Fitting tyres
•
Remove any instances of corrosion from the wheel rim seating
surfaces before fitting a new / another tyre. Corrosion can cause
damage to the wheel rims when the vehicle is in operation.
•
When fitting new tyres, always use new valves for tubeless tyres
or new inner tubes.
•
Always fit the valves with valve caps which have a gasket insert.
12.13
Hydraulic cylinder for folding
Check that the cylinder eye is firmly attached to the hydraulic cylinder.
If it is loose, secure the piston rod with high-strength bolt locking
compound and tighten the lock nut to 300 Nm.
Ceus-2TX BAG0183.2 01.19
123
