Adjustments
8.4
Setting the working depth of the levelling unit
If the levelling unit leaves furrows behind the roller:
→
Working depth of the levelling unit is too deep
If the tines leave furrows behind the roller:
→
Working depth of the levelling unit is too shallow.
Hydraulic levelling unit
Scale with pointer to indicate the set depth.
The values of the scale only indicate
the approximate working depth.
Adjust the working depth using the tractor control
unit
beige 1, 2
.
Manual levelling unit
The working depth of the levelling unit can be
adapted to the working depth of the tines at the
cranks.
Adjust the working depth using the crank and
secure the crank with the bracket.
•
Turning the crank towards the right.
→
Re-
duce the working depth.
•
Turning the crank towards the left.
→
In-
crease the working depth.
(1) Crank
(2) Lock bracket
(3) Adjustment spindle
(4) Scale (0 -195)
(5) Pointer
•
Set both adjustment units to the same values.
•
The values on the scale do not specify the working depth set in
mm.
88
Ceus-2TX BAG0183.2 01.19
