Adjustments
90
Cenius03-2TX BAG0112.13 07.21
Dismounting rollers
1. Actuate the tractor control unit
yellow
.
→
Completely lift out the implement.
2. Guide the parking feet into the parking fix-
ture and secure them with linch pins.
3. Actuate the tractor control unit
yellow
.
→
Carefully set down the roller.
4. Unscrew the threaded unions on them roller
receptacles and take off the retaining clips.
5. Pivot in the spacer elements on the running
gear cylinders.
Mounting the rollers
1. Pivot the spacer elements away from the
running gear cylinders.
2. Carefully drive the implement in reverse up
to the packed rollers.
→
A second person who can guide the opera-
tor is necessary for this task!
→
Alternatively, position the rollers with a
hoisting crane.
3. Actuate the tractor control unit
yellow
.
→
Lower the implement far enough that the
roller receptacles enclose the roller
4. Fasten the rollers on the roller receptacles
with retaining clips and threaded unions.
Fig. 52
Fig. 53
To connect the rollers correctly, the
clamping bracket and its bolts must be
installed according to Fig. 58.
Required tightening torque: 210 Nm
Fig. 54