General safety instructions
Cenius03-2TX BAG0112.13 07.21
23
•
Be particularly careful when coupling the machine to the tractor
or uncoupling it from the tractor! There are contusion and cutting
points in the area of the coupling point between the tractor and
the machine.
•
Standing between tractor and implement when the three point
hydraulic is actuated is prohibited.
•
Connect the machine to the prescribed equipment in accordance
with the specifications.
•
The release ropes for quick action couplings must hang loosely
and may not release themselves when lowered.
•
Also ensure that uncoupled machines are stable!
Use of the machine
•
Before starting work, ensure that you understand all the equip-
ment and actuation elements of the machine and their function.
There is no time for this when the machine is already in opera-
tion!
•
Do not wear loose-fitting clothing! Loose clothing increases the
risk over being caught by drive shafts!
•
Only start-up the machine, when all the safety equipment has
been attached and is in the safety position!
•
Comply with the maximum load of the connected machine and
the approved axle and support loads of the tractor. If necessary,
drive only with a partially-filled hopper.
•
It is forbidden to stand in the working area of the machine.
•
It is forbidden to stand in the turning and rotation area of the
machine.
•
There are contusion and cutting points at externally-actuated
(e.g. hydraulic) machine points.
•
Only actuate externally-actuated machine parts when you are
sure that there is no-one within a sufficient distance from the
machine!
•
Secure the tractor against unintentional start-up and rolling be-
fore you leave the tractor.
For this:
ο
Lower the machine onto the ground
ο
Apply the parking brake
ο
Switch off the tractor engine
ο
Remove the ignition key
