Adjustments
82
Cenius03-2TX BAG0112.13 07.21
8
Adjustments
WARNING
Risk of contusions, cutting, catching, drawing in and knocks
through
•
unintentional falling of the machine raised using the trac-
tor's three-point hydraulic system.
•
unintentional falling of raised, unsecured machine parts.
•
unintentional start-up and rolling of the tractor-machine
combination.
Secure the tractor and the machine against unintentional start-up and
rolling before making adjustments to the machine. See page 77.
8.1
Working depth of the coulters
With the adjustment of the working depth of the coulters, the levelling
unit is also adjusted.
Manual adjustment
Adjustment of the working depth of the coulters is carried out hydrau-
lically in working position via the tractor control unit
green
.
The adjustment is carried out via:
•
The roller or running gear (if the roller is dismounted)
•
The support wheels
With the roller removed: Use the running gear for adjusting the work-
ing depth (
yellow
tractor control unit).
There is a scale on the right support wheel that
shows the set depth.
(1) Scale (0 – 30 cm)
(2) Pointer indicates the working depth
Fig. 45
The values of the scale only indicate
the approximate working depth.
If a uniform working depth cannot be
adjusted, see page
98
.