Coupling and uncoupling the machine
Cenius03-2TX BAG0112.13 07.21
81
Uncouple the implement with ball bracket
1. Safeguard tractor and implement against rolling off unintention-
ally. See page 77.
2. Lower the stand.
3. Open the stop tap on the drawbar cylinder.
4. Decouple the implement from the tractor.
4.1 Decouple the coupling device.
4.2 Actuate the tractor control unit
yellow
.
→
Lift off the drawbar.
4.3 Pull the tractor forward by approx. 25 cm.
→
This will allow more clearance between tractor and imple-
ment and give better access for uncoupling the supply
lines.
4.4 Safeguard the tractor and implement against unintentional-
ly rolling off.
4.5 Close the stop tap on the drawbar cylinder.
4.6 Switch tractor control unit
yellow
to float position and thus
depressurise the hydraulic hose lines.
4.7 Decouple the supply lines.
