Adjustments
86
Cenius03-2TX BAG0112.13 07.21
8.3
Adjusting the traction assistance
The weight transfer to the tractor can be adjusted to meet the re-
quirements via the hydraulic system pressure of the traction assis-
tance.
Fig. 49
1. Switch on traction assistance
2. Completely close the pressure-limiting valve.
3. Actuate the tractor control unit
yellow
.
→
Lift the implement.
4. Switch the tractor control unit
yellow
to float position.
5. Open the pressure-limiting valve far enough that the desired
pressure is shown on the pressure gauge.
The optimal value for adjusting the traction assistance depends on
•
the soil conditions
•
the working width of the implement
•
the tractor
•
from working with or without roller
Reference values for setting the pressure:
Cenius
4003-2TX
5003-2TX
6003-2TX
8003-2TX
80 bar
100 bar
120 bar
160 bar
When working with traction assistance, the front tines are relieved. If
the working depth at the front is shallower than that behind, the pres-
sure of the traction assistance is set too high.