background image

97385C (REV B - 3/00)

HRC2-1C

NOTE:

  It is important to insure proper ventilation.  Allow a

minimum clearance of 6 inches (152 mm) in front and 3 inches

(76mm) in the rear of the unit.  If unit is to be installed in an

enclosure, allow the following clearances around unit - 1 inch

(25mm) each side, 3 inches (76mm) in the rear, 3 inches

(76mm) inches above wall.

This chiller has been designed for use with potable water

ONLY

.

HRC2-1C

Remote Chiller

Installation Instructions

LEGEND

A= 1/4" (6mm) O.D. TUBE WATER OUT

B = 1/4" (6mm) O.D. TUBE WATER INLET

C = TEMPERATURE ADJUSTMENT

D = ELECTRICAL

Reviews: