22
EN
Duty cycle measurement
• Insert the black connector lead (P) into the
negative
COM
(black) terminal (I) and the red
connector lead (P) into the positive
V
(red)
terminal (J).
• Set the function switch (L) to the
/Hz/%
position.
• Press the
MODE
button (H) to shift to
measuring the duty cycle
%
(in percent).
• Connect the test probes (P) across the circuit
or component being measured.
• The stabilized value on the display (F) is read as
the actual reading.
Continuity measurement
• Insert the black connector lead (P) into the
negative
COM
(black) terminal (I) and the red
connector lead (P) into the positive
V
(red)
terminal (J).
• Set the function switch (L) to the
Ω
/
position.
• Press the
MODE
button (H) to shift to
measuring the continuity . The
indicator is
shown on the display (F).
• Connect the test probes (P) across the circuit
or component being measured.
