17
EN
• Press the
REL/
button (E) again to show the
absolute measurement. The
REL
indicator (10)
goes off.
Clamp measurement
NOTICE
Disconnect the test leads (P) from
the product before making clamp measurements.
• Set the function switch (L) to the
400A
or
1000A
position. If the approx. range of the
measurement is not known, select the highest
range. Then move to the lower ranges if
necessary.
• Press the trigger (D) to open the jaw. Fully
enclose only one conductor. For best results,
center the conductor in the jaw.
