16
EN
• Press the
HOLD/
button (M) again to return to
normal operation.
Changing the measurement range
By default, the measurement range is set
automatically and the
AUTO
indicator (6) is
shown on the display. It is possible to set the
measurement range manually (not in every
measurement mode).
• Press the
RANGE
button (G) to activate the
manual mode and to disable the automatic
range setting. The
AUTO
indicator (6) goes off.
• By every press on the
RANGE
button (G) the
relevant decimal place changes its position.
• If a reading is higher than the measurement
range,
OL
is shown on the display (F).
• Press and hold the
RANGE
button (G) for
more than 1 second to exit manual mode and
restore automatic range setting. The
AUTO
indicator (6) is shown on the display.
Zero the display
• Press the
REL/
button (E) to zero the
measured value (13). The
REL
indicator (10) is
shown on the display.
