10
www.amano.com/time
1-800-253-9836
PIX-55
Ribbon Cartridge Replacement
Step 1.
Insert the clock key (required to unlock the cover),
turn clockwise, lift up the cover (see figure), and
remove for ribbon access. Locate the ribbon
cradle.
Note:
You MUST have the key to remove the cover for
ribbon replacement.
Step 2.
Pull the two release tabs ("B") upward, and
hold with index and middle fingers (see
figure).
Step 3.
While holding the release tabs in an upward
position, grasp the tab on the ribbon cassette,
and pull the ribbon cassette out of the cradle
(see figure).
Note:
If the print mechanism is down (a piece of
paper could not be inserted), press the
RESET
button to move the carriage up. This will make
the ribbon installation easier.
Step 4.
Insert a new ribbon and be sure to mount it
between the ribbon guide and the printer
head as illustrated (see figure and arrows).
The Amano
PIX-55 clock
pictured to the right,
shows a typical
layout with the
ribbon cartridge
installed in the
cradle.
All manuals and user guides at all-guides.com