PIX-55
www.amano.com/time
1-800-253-9836
5
Enabling or Disabling Daylight Saving Time
Note
– when this setting is set to
ON
, the clock’s time will
automatically change for DST. When this setting is set to
OFF
, the
clock’s time will not change for DST.
(To program the dates for the begin and end DST, refer to the Other Options
Menu sections, below.)
1. Press
the
PROGRAM
button for two seconds, then
press the
CHANGE
button until
dL S
P3
flashes in
the display.
2. Press
the
ENTER
button.
3. Press
the
CHANGE
button to alternate between ON
and OFF.
4. When the display flashes the correct setting, press
the
ENTER
button.
5. When the display flashes
dL S
P3
, press the
PROGRAM
button to exit the Program Mode.
Changing the Begin Date for DST: Other Options Menu
Note
– the government standard for DST is subject to change. Your
clock is factory set for correct DST based upon when it was
manufactured, but any revision to DST begin or end dates may
require updating the system-set DST calendar.
The steps below change the begin date for DST. Updating the begin date for
DST needs to be done just one time, since the clock’s rolling calendar function
will auto-calculate the begin date for each year thereafter. To change the
end
date for DST, refer to the next section.
1. Press
the
PROGRAM
button for two seconds, then the
CHANGE
button until
0 hr
P5
flashes in the display.
2. Press
the
ENTER
button.
3. Press
the
CHANGE
button until
bdL
16
(begin Daylight Saving
Time Date) flashes in the display.
4. Press
the
ENTER
button.
5. The display shows the current month, date and year for the
beginning of DST (year 2009 shown). The year flashes,
indicating the year is the first part of the DST Begin Date that
can be adjusted.
6. Press
the
CHANGE
button until the year shows the correct
year for the beginning year for the DST modification.
7. Press
ENTER
. The date flashes.
All manuals and user guides at all-guides.com