12
www.amano.com/time
1-800-253-9836
PIX-55
Error Messages
In the event of an error, a message will appear in the display. The possible error
messages are listed in the following table along with their probable causes and
solutions.
Note
– An error message can be possibly cleared by pressing the
“
Reset
” button. The Reset button is located on the bottom right back
corner of clock. It is a small button inside the hole (see figure). You
DO NOT have to remove the back plate to press the Reset button.
There is a cutout that allows access to it even if the clock is still
mounted on the wall. However, you will have to remove the top cover
to access the programming buttons should you have to reprogram the
clock due to an error. To remove the cover, insert the key provided
(Amano Part # AJR-201150), turn clockwise and lift to remove.
For error messages
Pr
E I
through
Pr
E r
, unplug the clock before checking to
see that the carriage is not stuck or jammed. Also, check to see that the ribbon
cables are in good condition. After clearing any jams, plug the clock back in.
Contact us at
1-800-253-9836
if you need assistance.
The
dL
error message signifies that an attempt was made to get into the
Program mode during the Daylight Saving changeover one-hour lockout. Wait
one hour and you will be able to program the clock.
Figure: PIX-55 Bottom View
All manuals and user guides at all-guides.com
