18
Pad Change
Burnishing and Diamond Impregnated Pads
1. Place the machine in the Rok-Bak position. (see Rok-
Bak section)
2. Remove centering device and inspect pad. If pad has
worn less than 1/4” (6mm), replace it.
CAUTION!
Carefully inspect the pad holder for cracks
or damage. Replace if necessary.
WARNING!
A damaged pad holder rotating at high
speeds may be an extreme hazard if it should come
apart.
3. Make sure wheels are in the burnish position. Refer
to Wheel Adjustment.
Level-S Diamond Pads
1. Place the machine in the Rok-Bak position. (see Rok-
Bak section)
2. Remove centering device and previously attached
pad.
CAUTION!
Carefully inspect the pad holder for cracks
or damage. Replace if necessary.
3. Place Level-S rubber diamond pad face down on the
floor.
4. Center and attach the “Diamond Side” face of the
Level-S adapter pad to Level-S diamond pad.
5. Attach Level-S pad adapter with the rubber diamond
pad to pad holder.
CAUTION!
Make sure pads are properly centered on
pad holder to reduce machine vibration.
6. Secure with pad retainer.
7. Make sure wheels are in the “grind” position. Refer to
Wheel Adjustment.
Summary of Contents for Pioneer Eclipse PE420GP Series
