Page
33
of
37
© Copyright 2015 Amano McGann, Inc. 4000_Operations_06122015
OPUS-4000 Series
Operations
Manual
[Fig. 7.1D]
Edit the
Start Time
by pressing
2
on the remote and entering the desired OPEN
time in a 24-hour format. Once the desired
Start Time
is set, press
Chan Down
to
accept the change. Edit the
End Time
by pressing
3
and entering the desired
CLOSE time in a 24-hour format. Once the desired
End Time
is set, press
Chan
Down
to accept the change.
Press
Power
after the desired changes have been made.
7.1.7 Backlight Time Activation
The OPUS-4000 Series backlight may be activated at a user-specified
Start
and
End
time. Press
9
to enter the
Backlight Setting
menu. Press
1
to activate the
Backlight ON/OFF Time Setting
. The current status of the setting is shown near
the top of the display.
[Fig. 7.1E]
Edit the
Start Time
by pressing
2
on the remote and entering the desired ON
time in a 24-hour format. Once the desired
Start Time
is set, press
Chan Down
to
accept the change. Edit the
End Time
by pressing
3
and entering the desired
OFF time in a 24-hour format. Once the desired
End Time
is set, press
Chan
Down
to accept the change.
Press
Power
after the desired changes have been made.
7.1.8 Configuring the Volume Switch
The volume switch time determines the time the Exit Terminal will use
Volume
One
rather than
Volume Two
. This feature is often used when ambient noise is
louder at a certain point of time in the day. To add a volume switch time, enter
the
Management Operation
menu and press
5
.