Page
34
of
37
© Copyright 2015 Amano McGann, Inc. 4000_Operations_06122015
OPUS-4000 Series
Operations
Manual
Activate the volume switch by pressing
1
. The current status is shown near the
top of the menu. Edit the start time by pressing
2
and entering the desired value
in a 24-hour format. Press
Chan Down
to confirm the entry. Press
2
and enter
the
End Time
in a 24-hour format. Press
Chan Down
to confirm the entry.
Note: The volume switch setting uses volume
One
in between the
Start
and
End
range. Volume
Two
is used for all times
outside
of
the
Start/End
range.
7.2 Page Two
Exit Warning:
Warning alarm.
Password Setting:
Terminal staff management.
Initial Operation:
Navigate to the
Initial Operation
menu.
Staff Operation:
Navigate to the
Staff Operation
menu.
Engr. Operation:
Navigate to the
Engineer Operation
menu.
7.2.1 Exit Warning
The exit warning alarm can be configured to sound if the patron has not left the
arming loop for a period of time. Press
1
to enter the
Exit Warning
menu. Enter
the desired value using the remote numb pad. Once the desired value is set,
press
Chan Down
to confirm the change and
Power
to return to the
Management Operation
menu.
7.2.2 Managing Staff Passwords
A staff member can be added to the Exit Terminal with a function level and
password. Press
2
to enter the
Password Setting
menu.
Add a new staff member by pressing the number on the remote designated by
the number beside the
Stf.No.
Once in the second
Password Setting
menu,
press
1
to add a password for the staff member. Enter a password and press
Chan Down
to accept the change and move to the function level. Enter a
function level for the user and press
Chan Down
to accept the change.
To continue adding users, press
Vol Up
. To exit the
Password Setting
menu,
press
Power
until back to the
Management Operation
menu.
