“Peanut Tech”
Monitoring and Control
2110A PT Peanut Combine
Key Features
As part of Amadas’ commitment to
continuous product improvement, we are
pleased to include the
“Peanut Tech”
package on 2110A and 2108A Pull-Type
Peanut Combines.
•
Combine Speed
is monitored and
displayed to the operator. If the speed drops
below 85% or goes beyond 110% of the
design speed, both a visual and audible
alarm activates.
•
In-cab control and position display of
the Elevator Air Control actuator
meters
the volume of air in the peanut elevator duct
(shown as Duct Air).
•
Duct Air
can be controlled in two different
ways:
Manual
- Manual mode allows the operator
to adjust the air as needed based on
observed peanut flow to the basket.
Automatic
- In Auto Mode, the controller
monitors duct air pressure, combine speed,
and elevator air actuator position to
determine the optimum damper setting.
As air pressure increases, the damper is
opened; when pressure decreases, the
damper closes. The goal is to apply as much
air as needed but not so much as to create
LSKs.
•
Display and alarm of Peanut Duct Load:
The controller monitors duct air pressure,
combine speed, and elevator air actuator
position to determine the amount of load
placed on the Peanut Elevator system.
This aids in determining harvest speed and
helps prevent overloading the combine.
When the load reaches 80% of design load,
a visual and audible alarm will activate to
warn the operator the system is reaching
capacity and therefore prevent “plugging the
duct.”
•
Peanut Door Alarm:
The Peanut Door is located on the left side
of the combine above the collection auger. It
will open to release peanuts that continue to
be harvested when the elevator duct “plugs”
due to overloading or the introduction of
foreign objects.
It does so to reduce machine damage but
peanut loss will continue until the combine is
stopped. When this happens, the Amadas
Logo will be replaced with a flashing “Peanut
Door” display along with an audible alarm.
•
Resettable Service Hours
function keeps
track of combine run time since last service
was performed.
84
12/18/15
MAN143
Summary of Contents for 2110A
