Amadas 2110A, Manual, Page: 16 / 99

Safety 2110A PT Peanut Combine
Practice Safe Maintenance
•
Understand the service procedure before
doing work. Use proper tools and refer to
the User Manual.
•
Keep service area clean and dry.
•
Lower machine to ground, engage parking
brake, turn off engine, and remove key
before performing maintenance.
•
Allow time for the machine to cool
completely.
•
Never lubricate, service, or adjust machine
while it is moving.
•
Keep hands, feet, and clothing from power-
driven parts.
•
Securely support any machine elements
that must be raised for service work.
•
Keep all parts in good condition and
properly installed.
•
Fix any damage immediately; replace worn
or broken parts.
•
Keep the machine free of any buildup of
grease, oil, or debris.
Handle Chemical Products
Safely
•
Direct exposure to hazardous chemicals
can cause serious injury. Potentially
hazardous chemicals used with AMADAS
equipment include such items as
lubricants, coolants, paints, and
adhesives.
•
Before you start any job using a
hazardous chemical, check the MSDS so
that you are aware of the risks and know
how to proceed safely. Carefully follow
all procedures, using only recommended
equipment.
•
See your AMADAS dealer for MSDS on
chemical products used with AMADAS
equipment.
Avoid Contact with Moving Parts
•
Wear close-fitting clothing to avoid
entanglement with moving parts.
•
Keep hands, feet, and clothing away
from power-driven parts.
•
Never clean, lubricate or adjust machine
when it is running.
Remove Accumulated Crop
Debris
•
The buildup of chaff and crop debris near
moving parts or heat sources is a
hazard.
•
Check and clean these areas frequently.
•
Before performing any inspection or
service, engage parking brake, turn off
engine, and remove key.
NOTE! This section covers general safety. Some items may not apply to this type of machine.
6 12/18/15 MAN143