Amadas 2110A, Manual, Page: 80 / 99

Maintenance 2110A PT Peanut Combine
Belt Adjustment
V-belt drives power the fans, hydraulic power
unit (optional), separating section and
stemmer saws. They also transmit power
from the PTO input gearbox to the main
jackshaft. Properly maintaining the belts is
essential to ensure efficient machine
operation.
Check and adjust the belts as follows:
1. Be certain the tractor engine is shut off.
2. Open shields covering drive belts. Latch
shields open.
3. Check belts and sheaves for wear.
Replace if necessary.
4. The main drive belt should have no more
than ½” of deflection when checked in
the middle. Adjust the belt tension as
necessary.
5. Make sure that idlers are aligned and
fasteners are tight. Replace shields
before operating the machine.
DANGER
Replace all shields before starting
combine operation. Death or serious
personal injury may result if shields are not
in place.
Idler adjustment
Idler
Raise shields to access belts
70 12/18/15 MAN143