Controls and Adjustments
2110A PT Peanut Combine
PTO Speed Adjustment
•
An electrical cable runs from the
magnetic pickup to a relay box located
above the left side of the header.
•
The normal operational range of the
combine is 90% to 110% of the design
speed as shown on the digital speed
indicator. The tractor PTO should
operate from 710 RPM (90%) to 870
RPM (110%) unless the combine is
optionally equipped for 850 RPM
operation. If speeds drop to 671 RPM
(85%) or go past 870 RPM (110%), an
alarm will sound.
•
The combine design speed is 100% on
the combine speed monitor or 790 PTO
RPM.
•
For very dry peanuts, reduce the
combine speed to below 100% to aid in
performance.
•
For tough or wet conditions, raise the
combine speed over 100% to increase
aggressiveness and aid in performance.
NOTE!
For more information, see
instructions for the
“Peanut Tech”
package.
IMPORTANT!
Never exceed 110% of
the design speed – serious machine
damage may result!
The 710-870 PTO RPM range is standard
for most machines. Some combines are
equipped with optional drives that require
different input speeds. Refer to the PTO
RPM on your machine.
Monitor cable
58
12/18/15
MAN143
Summary of Contents for 2110A
