Amadana AD-203, Instruction Manual

Page: 17 / 22

電源コンセント
SETTING THE ALARM STOPPING THE ALARM
USING THE SLEEP FUNCTION
Capable of Playing Your Favorite Song with CD or iPod in Place of an Alarm Clock.
Capable of Turning off the Power Automatically When Sleeping
Plug Socket
Stopping the Alarm
Press [Alarm ] key and then [Stop ] key
*CD and iPod will not be operated will not be operated for the alarm
function until [Alarm ] key is pressed.
*For buzzer sound, the alarm operation will be stopped once
[Alarm ] key is pressed.
Snooze function:
Turns off the alarm sound temporarily and turns it on again 5 minutes later.
Shift the Alarm Function
Press [Alarm ] key and turn on "On" or "Off" on
the display.
The alarm sounds again at the previously set alarm time.
Using the Snooze Function
A remaining time is displayed in the CD playback time display area by pressing
the [Sleep ] key again.
Checking the Remaining Time
Keep pressing [Sleep ] key until the "Sleep mark " is completely turned off.
Canceling the Sleep Function
Press the [Snooze ] key.
Valid for up to 60 minutes from the alarm setting time.
Selecting the alarm setting mode
Press the [Up ] key.
An alarm setting time blinks.
* If the alarm cannot be set unless the clock has been set.
Main Unit Display Front of Main Unit
Setting the Sleep Timer
Press the [Sleep ] key.
Every time the [Sleep ] key is pressed, a setting time is extended. (Up to 2 hours)
Setting the alarm time
Press the [Up ] or [Down ] key to set the alarm time.
Press the [Snooze ] key to settle the alarm time.
Setting the volume and completing alarm setting
Press the [Volume-up ] or [Volume-down ] key to set the volume.
Only when BUZZ is selected, the volume can be chosen from 2 levels (VOL Hi or VOL Lo).
Press the [Snooze ] key to settle the volume,
thus completing alarm setting.
Using "Stand-by" mode
Press [Power ] key for "Stand-by" mode
*Alarm function will not be operated at the pre-set alarm time while "Stand-by" mode is
not on. Please make sure that the operation is in "Stand-by" mode to use the alarm function.
Setting a sound source
Press the [Function ] key to select a sound source
(iPod/CD/BUZZ (Buzzer)).
Press the [Snooze ] key to settle the sound source.
Press the [Snooze ] key to settle the track
you want to play back.
Press the [Skip ] keys to select the track
you want to play back.
Every time the [Function ] key is pressed,
the display changes as follows
Buzzer
iPod CD BUZZ
Only When CD Is Selected
10 20 30 ・ ・ ・ 2:00
A sleep mark is turned off.
Introduction
If there is no key entry for 5 seconds before completing alarm setting,
the alarm setting mode is cancelled. To redo it, start from Step
.
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Remote Controller Main Unit
Keys Used
Main Unit Operation Panel
Remote Controller
Keys Used
Main Unit Operation Panel
Remote Controller
Keys Used
Main Unit Operation Panel Remote Controller
An alarm mark is lit up at the left of the
main unit display and the time display
area on the front of the main unit.
32 33