Amada 1-288-01, Operation Manual, Page: 44 / 144

CHAPTER 3: SYSTEM CONFIGURATION
HF28 DC RESISTANCE WELDING SYSTEM
3-12 990-372
5. Language
Press the
5
key to toggle between English and German. All menu items and instructions on the screen
will be in the language selected.
Setup 3
1. DO TEST WELD
In voltage mode, the unit will do a test weld to optimize response to varying weld conditions. Press
1
to
bring up the following choices:
1) ALWAYS
A test weld will be done if:

The voltage level changes

The time in any element of the schedule changes

If the weld energy field is highlighted and the
V
key is pressed.
2) ASK
The user will be prompted to choose if a test weld is done or not upon the following conditions:

The voltage level changes

The time in any element of the schedule changes

If the weld energy field is highlighted and the
V
key is pressed.