Amada 1-288-01, Operation Manual, Page: 33 / 144

HF28 DC RESISTANCE WELDING SYSTEM
990-372 3-1
CHAPTER 3
System Configuration
Section I: Menus
Before You Start
Configuration is simply a matter of selecting various
MENU
options so the Control will work with all the
components of your welding system.

Verify that all connections have been made according to the instructions in Chapter 2,
Installation and Setup.

Turn the Control ON.

Turn the shop air supply ON.
Overview
You program the system settings of the Control
through the
MAIN MENU
screen and its sub-
menus. You go to the
MAIN MENU
screen by
pressing the
MENU
key on the front panel of the
Control.
All of the menu screens have similar prompts that
tell you how to go to a function on the menu and/or
get to the next menu.
<MAIN MENU>
1. SETUP 6. RELAY
2. WELD COUNTERS 7. RESET DEFAULTS
3. COPY A SCHEDULE 8. CHAIN SCHEDULES
4. CALIBRATION
5. SYSTEM SECURITY
Number Select an item

At the NUMBER Select an item prompt, use the numeric keypad to select one of the functions on
the menu.

Press the down keys to go to the next or previous menu. Each additional menu gives you
choices for additional functions.

Press the
MENU
key to return to the main menu.
Main Menu
1. SETUP
From the
MAIN MENU
screen, press
1
to go to the
SETUP 1
screen.
The
SETUP 1
screen is shown on the right with
typical settings.
<SETUP, page 1 of 3>
1. FOOTSWITCH WELD ABORT : OFF
2. SWITCH DEBOUNCE TIME : 10 ms
3. FIRING SWITCH : AUTO
Number Select an item, Page, RUN or MENU