6
•
Cleaning
Confirm the accessory parts inside the refrigerator and wipe the inside with a soft cloth.
•
Power-on
Insert the plug into the solid socket to start the compressor. After 1 hour, open the freezer door, if the
temperature inside the freezer compartment drops obviously, it indicates the refrigeration system is
working normally.
•
Storage of food
After the refrigerator runs for a period of time, the internal temperature of the refrigerator will be
automatically controlled according to the user’s temperature setting. After the refrigerator is fully cooled,
put in foods, which usually need 2~3 hours to be fully cooled. In summer, when the temperature is high, it
takes more than 4 hours for the foods to be fully cooled (Try to open the refrigerator door as less as
possible before the internal temperature cools down).
If the refrigerator is installed in the moisture place, make sure to check whether the ground wire and
leakage circuit breaker are normal. If vibration noises are produced due to the refrigerator contacting the
wall or if the wall gets blackened by air convection around the compressor, move the refrigerator away from
the wall. Setting up the refrigerator may cause jamming noise or image chaos to the mobile phone, fixed-
line telephone, radio receiver, television set surrounding it, so try to keep the refrigerator as far away as
possible in such case.
Functions
Function Setting
When the refrigerator system is connected to power supply for the first time, all icons on the display panel
gets illuminated for 2s.
When all the doors are close, the display gets extinguished automatically if no key operation within 3
minutes. When the display is off, it will light up if any door is opened or any key is pressed.
The following key operations are valid only when the keys are unlocked and gets illuminated on the display.
(Refer to “Child Lock” for unlocking the keys)
“Inverter” is the frequ
ency conversion indicator. When the power is turned on, it lights up when the
compressor is working.
Press the Function key for the first time to activate the function setting state, and then press the function
key again to select the function to set, fina
lly, press the „OK/Lock“ key to validate the function setting.
Fridge Zone
„Inverter“ icon
Freezer Zone
Celsius display
Digital temperature display
„Fast Freez
ing
“ icon
„Child
-
lock“ icon
„Temperature“ button
„OK/Lock“ button
„Fast Cool
ing
“ icon
„Vacation“ icon
„Smart“ icon
„Temperature Zone“ button
„Function“ button
