12
Simple Fault Analysis and Elimination
With regard to the following small faults, not every failure needs to be fixed by the technical service
personnel; you can try to solve the problem.
Case
Inspection
Solutions
Completely non-
refrigeration
Is power plug off?
Are breakers and fuses broken?
No electricity or line trip?
Re-plug
Opening the door and checking whether the
lamp is lit.
Abnormal noise
Is refrigerator stable?
Does refrigerator contact the wall?
Adjusting refrigerator's leveling feet.
Off the wall.
Poor refrigerating
efficiency
Do you put hot food or too much food?
Do you open the door frequently?
Do you clip food bag to the door gasket?
Direct sunlight or near a furnace or
stove?
Is it well-ventilated?
Temperature setting in too high?
Putting food into refrigerator when hot food
becomes cool.
Checking and closing the door.
Removing the refrigerator from the heat source.
Emptying the distance to maintain good
ventilation.
Setting to the appropriate temperature.
Peculiar smell in
refrigerator
Any spoiled food?
Do you need to clean refrigerator?
Have you packed food of strong flavors?
Throwing away spoiled food.
Cleaning refrigerator.
Packing food of strong flavors.
No key response
Check whether the Child Lock function is
enabled on the display panel.
Press & hold the "OK/Lock " key for 3 seconds to
unlock the key, and then conduct the key
operation. (For details, refer to the Child Key
function.)
Temperature setting
impossible
Check whether the Smart, Fast Freeze or
Vacation or Fast cooling function is
enabled on the display panel.
Exit the special function mode, and then set up
the temperature (for details refer to the
Functions section)
Freezer
temperature
displayed on the
panel, with the
temperature digits
flashing
Is power cut before?
Press any key to lift the alarm (refer to the
Overtemperature alarm function), and then
check the foods inside the fridge and freezer
compartments get spoiled.
The left fridge door
unable to be closed
tightly.
Check whether the flip beam is restored
to its original position.
Turn the door flip beam by hand to restore it to
the correct position, and then close the door.
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it
yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact
the local store where your purchase was made. This product should be serviced by an authorized engineer
and only genuine spare parts should be used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods
and clean the appliance, leaving the door ajar to prevent unpleasant smells.
