Always
O
n UPS Systems
4.4.
Input, Output and External Battery
Connection
The 700VA, 1,000VA and 1,500VA (701N, 102N and 152N) come with a 6’ cord,
complete with a 5-15P connection that will plug into a regular wall receptacle (Figure
4.4.1).
The 2,000VA and 3,000VA have a terminal strip connection to which will require a
connection to a cord to (Figure 4.4.2). Ensure that the cable is long enough to place
the UPS system and allow for maintenance on the UPS system in the future (See 4.1
Location).
The cable sizes, input breakers/outlets and distribution methods used during
installation are subject to the local and national electrical codes of practice,
therefore are not detailed here.
Permanent wiring must be routed to the terminal strip using appropriate materials as
required by local and national codes.
External battery bank connections are described later in this manual.
Ensure UPS is provided with an adequate ground (earth).
Figure 4.4.1
700VA, 1,000VA and 1,500VA input connection
M0309_N_Series_ABS_700-3kVA_User_Manual V2.8 2012-06-12
11
Figure 4.4.2
2,000VA and 3,000VA input connection
EXT BATT
B+
INPUT
B-
I/P
L
I/P
N
I/P
GND
OUTPUT
O/P
GND
O/P
L
O/P
N
