Full Height Tandem Installation Instructions
Page 4 [email protected] +1(909) 591-8431 www.alvaradomfg.com
Installation Instructions
Compliance and Standards
This page defines the product labels required for compliance with UL Electrical Testing Laboratory and International
CE standards.
International CE standards:
a. Label (2) the Fuse Specification.
F3.0A, 240V
b. Label (3) the Warning, Risk of Electric Shock.
DANGER
c. Label (4) the Caution, Risk of Danger.
DANGER
UL294, 6e, UL325 Testing Laboratory Standards:
a. Label (2) the Fuse Caution.
CAUTION
: For continued protection,
against risk of fire or shock, replace with
the same type and rating fuse.
b. Label (3) the Warning, Risk of Electric Shock.
WARNING:
For continued protection,
against risk of fire or shock, replace with
the same type and rating fuse.
c. UL294, Access Control Levels:
Destructive Attack - Level 1
Line Security - Level 1
Endurance - Level 4
Standby Power - Level 1
The following tools may be required during the installation, dependent on the specific product installed. These tools are
not provided.
Pencil
Phillips Tip
Screwdriver
Tape
Measure
Drill
5/8” Concrete
Drill Bit
9/64" Drill
Bit
Installation Tools
O
N
Socket
Wrench
⅛” Allen
Wrench
9/16” Wrench
3/4" Wrench
Chalk Line
Ladder
Level
9/16” Socket
3/4" Socket
Grease
(see "Lubrication")
Flat Tip
Screwdriver
Wire
Strippers
Hammer
Drill
Clear RTV
Silicone
Torque
Wrench
