Page 38 [email protected] +1(909) 591-8431 www.alvaradomfg.com
Installation Instructions
1.
Determine where the turnstile will be installed. Consider the overall footprint size of the unit when determining
the installation location (Figure B1). Once the installation location has been determined, use a chalk line to mark
the centerline of the turnstile.
Default entry rotation is counter-clockwise. Confirm correct entry direction prior to installation.
n
Appendix B - CLSTT Installation
Yoke Installation
Follow the steps shown in Appendix A (Figures A2 - A10). When complete, refer to the "Roto Installation" to continue
the installation.
CLSTT Illustrated Parts List
Fig. B1
These instructions are for installing the Yoke section of the CLSTT. When complete, please refer back to the "Roto
Installation" section.
CLSTT Installation Instructions
Turnstile
Center
Turnstile
Center
Roto
Centerline
Yoke
Centerline
CL
Yoke
Centerline
94.50"
(2400mm)
47.25"
(1200mm)
47.25"
(1200mm)
Roto
Centerline
OV
Centerline
29.63"
29.63"
33.00""
Yoke Half
Section
8.00"
(203mm)
16.50"
16.50"
54"
(1372mm)
NOTE
The overall height of the CLSTT is 91.5". However, an additional 3" of clearance must be added for service and
maintenance.
Yoke
(Qty 2)
Roto
(Qty 2)
OV
(Qty 1)
Yoke Mounting
Channel - Lower
(Qty 8)
#10 x 3/4" Mounting
Screws (Qty 20)
Yoke Mounting
Channel - Upper
(Qty 8)
1/4-20 x 1" Mounting
Screws (Qty 12)
