ADJUSTMENT
SETTING P1-F3: express-setup of the end positions and radio control setup
The end
OPEN
and
CLOSED
positions are set automatically with a switch to the recording of
remote controls in the programming mode
P2-F1
(tob.
9).
lß
ATTENTION!
Make sure that a support is installed on the rail for the
OPEN
position
(fig.
16).
22
1
2
3
4
5
6
7
8
9
10
Simultaneously press and hold the buttons I
PR./
( I and
IST./
►I for 5 secs.
ATTENTION!
Automatie movement of the door begins immediately. Watch
the movement of doors. The automatic setting can be stopped with pressing
any button on the drive panel.
Note: the express-setup procedure can be started similarly, if the mode
'P1
'and
the setting
'F3'
are selected
The door automatically moves to the contact point between the carriage rail
and the support, and a dot appears on the display
The door automatically moves to the
CLOSED
position. Movement continues
to the upper panel support, and after that a dot appears on the display
The door automatically moves to the
OPEN
position
The door automatically moves to the
CLOSED
position
'rc'
is shown on the display, which means that the recording of remote controls
in
'step-by-step'
mode is expected
Press the selected control button on the remote control three times
The indicator will automatically show the number offered for a remote control in
the drive memory (the number can be changed using the buttons
IOP./ Al
or
ICL./vl)
Press the button
IST./
►lto confirm; after that a dot will appear on the display
1 n three seconds the automatic switch to the recording of the next remote control
will take place. To exit the programming mode press the button
I
PR./(
l
t
hree
times or wait for 15 seconds
SETTING P1-F2: setting the 'pedestrian position' /partial opening
Tab/e 7
g
■
m111
■
■
11
[9
�
[g
�
[g
The
PEDESTRIAN
position can only be set from the remote control board, recorded with this
control mode (menu
P2
mode
PE).
The
PEDESTRIAN
position can be set from any position of
door (end or intermediate position).
LEVIGATO DRIVES (LG SERIES) LEVIGATO ANTRIEBE (SERIE LG) COMMANDES LEVIGATO (SERIE LG)
