ADJUSTMENT
26
In three seconds the switch to the waiting mode for the signal from the next
[g
10
remote control will take place. To exit the programming mode press the
button IPR./ ( 1 or wait for 15 seconds (until automatic exit the setup menu)
The
tab/e 13
describes the setti ngs of deleting the remote control when it is absent but the
information for the remote control number in the drive memory is available.
2
3
4
5
Similarly to
tab.
12 items
1
to
4,
enter the menu 'P2' and select the setting 'F9'
After the appearance of'F9' inscription press the button
IST./
►
I
The number of the first recorded remote control will appear on the d isplay.
With the button IOP./Alor!CL./vlselect the of remote to delete
Press the button
IST./
►f A dot will disappear from the display, this means that
the remote control with the selected number is deleted from the memory
In three seconds the next number of the remote control
t
ll app
r
r on the
display. To exit the programming mode press the button PR./ ( or wait for
15 seconds (until automatic exit the setup menu)
Deleting all remote controls
1
Press and hold the button IPR./(lfor about 5 secs to enter the
programming mode
2
After the appearance of'Pl' inscription press the button IOP./ Al
3
After the appearance of'P2' inscription press the button
IST./
►
I
4
With the button IOP./AlorlCL./vlselect the setting 'F0'
5
After the appearance of'F0' inscription press the button
IST./
►
I
After the appearance of'- -' inscription press and hold the button
I
ST./
►
l
fo
r
6
5 secs. A dot will appear on the display, this means that all remote controls are
deleted from the memory
7
To exit the programming mode press the button IPR./(ltwice or wait for
15 seconds (until automatic exit the setup menu)
Tab/e 13
Table 14
�
[B
g
1
�
!?
��
[m
[II
LEVIGATO DRIVES (LG SERIES) LEVIGATO ANTRIEBE (SERIE LG) COMMANDES LEVIGATO (SERIE LG)
