Chapter 5. Remote Computer Operation
59
2. From the pop-up menu, click to clear PIP. PiP mode is disabled and the
remote computer windows are tiled.
To switch to Full Screen mode, see
To cascade or tile remote computer windows, see
Panel Array Mode
When you connect to 3 or 4 remote computers at a time, or you disable Full
Screen mode or Picture-in-Picture (PiP) mode, the remote computer windows
are tiled by default. To control a remote computer, you first must enable Full
Screen mode for that window (see page 56).
You also can enable Picture-in-Picture mode when connected to 2 remote
computers.
Note:
1. You cannot cascade or tile a window if you are connected to only 1
remote computer.
2. You can use the shortcut combination
[Alt+W]
to open the Window
menu.
To tile remote computers:
From the Window menu, select
Tile
. The remote computer displays are tiled.
To cascade remote computers:
From the Window menu, select
Cascade
. The remote computer displays are
cascaded.
To horizontally tile remote computers:
From the Window menu, select
Tile Horizontally
. The remote computer
displays are tiled horizontally.
To enable Full Screen mode, see
To enable PiP mode, see
Ctrl-Alt-Delete
You can use the shortcut key combination
[Ctrl-Alt-Delete]
on remote
computers for which you have installed the AltusenVNC service.
See