KE8220 User Manual
58
Picture-in-Picture (PiP) Mode
Picture-in-Picture (PiP) mode is the default display mode when connecting to
2 remote computers. PiP mode lets you to control a remote computer while
monitoring another. In PiP mode, one remote computer displays in a full-size
window, while the other remote computer displays in a smaller window at the
bottom right corner of the screen. The full-size window is the active window.
To swap the windows in which the remote computers appear, double-click on
the smaller window.
You also can change the display mode to Full Screen mode; or, you can
cascade or tile the windows. If you wish to change the display mode, you must
first disable PiP mode (see below).
To enable PiP mode:
1. If Full Screen mode is enabled, disable it.
2. Click the red triangle at the bottom right corner of the window that you
want to make smaller. A pop-up menu appears.
3. From the pop-up menu, select PIP. PiP mode is enabled.
Note:
You can enable PiP mode only when connected to 2 remote computers.
To disable PiP mode:
1. Click the red triangle at the bottom right corner of the window. A pop-up
menu appears.