Chapter 3. Basic Operation
27
Configuring Network Settings
The KE8220 uses standard TCP/IP protocol to communicate with computers.
You can attach the KE8220 to your Ethernet network via the LAN port, or
install the Wireless-G USB Adapter to connect to a wireless LAN. You can
choose to configure the KE8220’s TCP/IP properties manually, or dynamically
assign them using Dynamic Host Configuration Protocol (DHCP).
Configuring a Router
,
Gateway
,
or Firewall
You may need to open the following ports in your router, gateway, or firewall.
This will ensure that the KE8220 can communicate properly with remote
computers that have AltusenVNC installed.
TCP ports
: 1352, 1353, and 6998 (depends on remote computer setting)
UDP ports
: 1352
Note:
Windows Vista users must ensure that AltusenVNC is added to the list
of Windows firewall exceptions and that
Don’t Allow Exceptions
is not
enabled.