KN2108 / KN2116 User Manual
116
Additional Mouse Synchronization Procedures
If the mouse synchronization procedures mentioned in the manual fail to
resolve mouse pointer problems for particular computers, try the following:
Note:
These procedures are to be performed on the computers attached to the
KN2108 / KN2116's ports - not on the computer you are using to access
the KN2108 / KN2116 with.
Windows:
Note:
In order for the local and remote mice to synchronize, you must use the
generic mouse driver supplied with the MS operating system. If you
have a third party driver installed - such as one supplied by the mouse
manufacturer - you must remove it.
1. Windows 2000:
Set the mouse speed to the middle position; set the mouse acceleration to
None
(Control Panel
→
Mouse
→
Mouse Properties
→
Motion):
2. Windows XP / Windows Server 2003:
Set the mouse speed to the middle position; disable Enhance Pointer
Precision (Control Panel
→
Printers and Other Hardware
→
Mouse
→
Pointer Options):
kn2116.book Page 116 Thursday, July 10, 2008 4:05 PM