KN2108 / KN2116 User Manual
102
The File Menu
The File Menu allows the operator to Create, Save, and Open user created
Work files. A Work File consists of all the information specified in a Client
session. This includes the
Server List
and
Server IP
list items, as well as the
Hotkey settings.
Whenever a user runs the Client program, it opens with the values contained in
the current work file. The current work file consists of the values that were in
effect the last time the program was closed.
The File menu consists of three items, as follows:
The Tools Menu
Tools menu operations are performed after you connect, but before you switch
to remote view. There are two entries on the Tools Menu:
Keyboard
and
Config
. They are explained in the sections that follow.
Keyboard:
Various configuration actions related to the keyboard, video, and mouse can be
performed via hotkey combinations. The Hotkey Setup utility is accessed by
opening the
Tools
menu and selecting
Keyboard
. The
Hotkey Setup
utility that
comes up is essentially the same dialog box as the one discussed in the
browser-based Windows Client chapter. Refer to
page 64 for details.
Item
Description
New
Allows the user to create a named work file so its values will not
be lost, and it will be available for future recall.
Open
Allows the user to open a previously saved work file and use the
values contained in it.
Save
Allows the user to save the values presently in effect as the
current work file.
kn2116.book Page 102 Thursday, July 10, 2008 4:05 PM