Page 1
READ BEFORE USE – SAFETY INFORMATION
WARNING
To possible electrical shock, fire, personal injury and ensure safety operation
and service of the equipment, please follow these guidelines:
• Read the instruction before use and follow all safety instructions.
• Use the equipment only as specified in the instruction card; otherwise, the equipment's
safety features may not protect you.
• Do not use the equipment and/or the accessory if they look damaged and / or wet.
• Do not use the Product if it operates incorrectly.
• Do not use the equipment just before, during or just after an electrical storm (electrical
shock / high energy overvoltage!). Please make sure that your hands, your shoes,
your clothing, the floor, switches and switching components are dry.
• Never use the equipment if it just brought from a place with great temperature
difference.
• Do not use the equipment around explosive gas or vapor.
• Limit operation to the specified measurement category, voltage, or amperage ratings.
• Do not exceed the Measurement Category (CAT) rating of the lowest rated individual
component of a Product, probe, or accessory
• Avoid to use the equipment in the environment with strong magnetic fields, strong
electrostatic fields and strong RF fields.
• Comply with local and national safety codes. Use personal protective equipment
(approved rubber gloves, face protection, and flame-resistant clothes) to prevent
shock and arc blast injury where hazardous live conductors are exposed.
• Do not touch voltages > 30 V ac rms, 42 V ac peak, or 60 V dc.
• Keep fingers behind the finger guards on the probes.
• Use only current probes, test leads, and adapters supplied with the Product.
• Connect the common test lead before the live test lead and remove the live test lead
before the common test lead.
• Disable the Product if it is damaged.
• Only use probes, test leads, and accessories that have the same measurement
category, voltage, and amperage ratings as the Product.
• The battery door must be closed and locked before you operate the Product.
• Remove all probes, test leads, and accessories before the battery door is opened.
• Replace the batteries when the low battery indicator shows to prevent incorrect
measurements.
• Do not apply more than the rated voltage, between the terminals or between each
