Page 11
1) Turn off power to the circuit being test. Discharge all high voltage
capacitors;
2) Insert the testleads as showing in the above figure;
3) Turn the rotary switch to the Ampere, Milliamp or MIcroamp range;
4) Press
to switch to AC mode;
5) Open the circuit path to be tested and connect the testleads to the
break of the circuit;
6) The measured value shows on the display
7) If needed, press
to switch to manual ranging, press again to
change the range selected. Hold down the same button to return
to auto ranging.
E. MEASURING RESISTANCE
Warning
• To avoid electric shock, do not test on circuits or devices with 60V
DC or 30V rms AC.
Set up to measure Resistance
